ConvaTec fails to find silver lining in latest dispute with Smith & Nephew
The High Court recently decided that Smith & Nephew’s DURAFIBER Ag™ wound care product did not infringe ConvaTec’s patent relating to silverised wound dressings, and refused to grant springboard relief to ConvaTec based on infringing experiments carried out by Smith & Nephew to obtain regulatory approval for itsproduct.
ConvaTec owns European (UK) Patent 1343510, which relates to methods of preparing silverised yet photostable materials useful in, for example, wound dressings such as ConvaTec’s AQUACEL® Ag.
Smith & Nephew sought a declaration of non-infringement for its commercial process for making DURAFIBER Ag, also a silverised wound dressing. ConvaTec counterclaimed, alleging infringement, and in addition sought a springboard injunction based on Smith & Nephew’s early development work used to obtain regulatory approval.
This is not the first occasion in which this patent has been the subject of a dispute. In a previous action, Smith & Nephew contested validity of the patent, but it was upheld in amended form by both the High Court in June 2012 and the Court of Appeal in December 2012.
Claim 1 specified a method of preparing a light stabilised antimicrobial material, including a step of soaking the material in a salt solution to facilitate silverisation. The claim specified that the salt was “present in a concentration between 1% and 25% of the total volume of treatment”.
Smith & Nephew’s commercial process for producing DURAFIBER Ag used 0.77% salt, and ConvaTec contended that this fell within the claimed range of 1% and 25% because the lower limit of 1% should be understood to include anything above 0.5%, which rounds up to 1%. However, in considering the skilled person’s likely approach to rounding numbers in this particular case, the judge was persuaded neither by this argument nor by Smith & Nephew’s primary case that 1% constituted an absolute boundary. Instead, he adopted Smith & Nephew’s secondary argument – the 'one significant figure' construction, whereby only anything greater or equal to 0.95% was covered, because 1% was expressed to one significant figure and 0.95% was the lowest percentage that gave 1% when rounded up to one significant figure. The judge concluded that Smith & Nephew’s commercial process to make DURAFIBER Ag, using 0.77% salt, did not infringe the patent.
In 2009-2010 Smith & Nephew performed experiments which it used to obtain CE mark approval for its DURAFIBER Ag product. CE marking certifies that a product meets the essential requirements of all relevant EU medical device directives and is mandatory before medical devices can be sold in the European Economic Area.
ConvaTec contended that those experiments, which used different steps to the commercial process used above, infringed its patent, and provided Smith & Nephew with an unwarranted advantage (or 'springboard') in marketing DURAFIBER Ag. This was on the basis that the CE mark covering DURAFIBER Ag was obtained using this earlier process, but the CE mark was broad enough to cover DURAFIBER Ag made by the later commercial process (which had been developed subsequently to avoid the claims of the patent). Convatec stated that this fact justified an injunction against the sale of DURAFIBER Ag until the date on which Smith & Nephew would have obtained CE mark approval if it had applied using the later-developed commercial process (and so if it had not infringed the patent).
Unlike in the first question, where 0.77% was relatively far removed from the established lower boundary of 0.95% salt, in the second infringement question the judge had to consider a salt concentration that was much closer to the lower boundary. As part of this assessment, it first had to be established whether carryover fluid should be included in the term 'total volume of treatment'. Such carryover fluid is the fluid that the material will carry over from a preceding soaking step. Seen from the skilled person’s point of view, the judge decided that such carryover should be included. After assessing different ways of calculating the actual amount of carryover, the judge concluded that Smith & Nephew’s experiments to obtain CE mark approval for DURAFIBER Ag used 0.96% to 0.97% salt, and thereby infringed the patent.
Nevertheless, the judge did not grant ConvaTec an injunction. After reviewing the case law on springboard relief and its applicability to patent cases, he established five criteria that are relevant in considering whether springboard relief is appropriate in a patent case:
- Caution is required before a final injunction is granted restraining an otherwise lawful activity.
- The nature of any unwarranted advantage relied on should be identified, and the precise relationship between the unlawful activity in the past and the later acts which are said to exploit that unwarranted advantage must be considered.
- If an injunction is to be granted, it must be in an appropriate form and for a duration which is commensurate with the unwarranted advantage relied on.
- The court must be particularly careful not to put the claimant in a better position than it would have been in if there had been no infringement at all, especially if otherwise lawful competitive activity will be restrained.
- In considering what relief to grant, the availability of other remedies apart from an injunction must be taken into account – not only damages, but also the availability of an account of profits.
Two factors that contributed to the judge’s decision – in particular in light of the second bullet point above – were that:
- the final commercial product to be included in the scope of the injunction (were it to be granted) did not actually infringe the patent; and
- there was only an indirect relationship (the submission of data to a regulatory authority), which was not itself an infringing act, between the infringing acts and the later non-infringing acts.
Importantly, the judge was not satisfied that Smith & Nephew would necessarily have had to use the infringing process in order to obtain CE mark approval by the date of the trial (November 2013). On the contrary, the judge concluded that Smith & Nephew could have obtained CE mark approval by October 2013 based on its later, non-infringing process, which was developed in response to ConvaTec’s patent being upheld in the previous revocation action. Moreover, Smith & Nephew had stayed off the market until this judgment was handed down, which the judge viewed favourably, considering that in a sense it had thereby already submitted to a voluntary springboard remedy. Smith & Nephew could not be said to be exploiting an unwarranted advantage gained from the infringing experiments, and so any springboard relief would in fact overcompensate the patentee for any harm caused by the infringement.
Smith & Nephew’s commercial manufacturing process did not infringe ConvaTec’s patent. Its earlier experiments that had been used to obtain regulatory approval did infringe the patent, but were found not to justify the award of springboard relief to ConvaTec.
This judgment touches on issues of construction of numerical ranges and the availability of springboard relief in patent cases. The decision highlights that the scope of numerical ranges – in particular, which rules are to be adopted when rounding numbers that are close to the limits of a range – is dependent on the facts of the case and on the “natural approach of the skilled person”. This judgment is expected to be referred to in future patent cases dealing with the question of when springboard relief is appropriate.
As a postscript to this judgment, in parallel ongoing proceedings at the European Patent Office, a recent subsequent decision by the Boards of Appeal remitted the case to the Opposition Division to consider further claim requests submitted during opposition proceedings, having found a lack of inventive step in the claims that essentially correspond to those that were being considered by the UK High Court.
This is an insight article whose content has not been commissioned or written by the IAM editorial team, but which has been proofed and edited to run in accordance with the IAM style guide.
Copyright © Law Business ResearchCompany Number: 03281866 VAT: GB 160 7529 10